导航菜单
Search
Search:
Advertisement
文章正文
Hand lay up with fiberglass mat
Writer:admin    Released:2017-05-27 11:36:12    Type:【L】【M】【S

Mat is the most versatile and extensively used shape of fiberglass for the hand lay up technique. Mat is made up of short, man or woman fiberglass that may be hand laid in location. We inventory mat in tow weights. ¾ oz.. And 1 ½oz.. In keeping with square foot. Mat is utilized in programs in which electricity and durability are required, which include, on work decks for industrial and sport fishing boats, cabin tops, all sorts of tanks, washboards, battery packing containers, decks and balconies on houses, and auto body repair paintings.

 

Mat will conform nicely to hard angles and tuck in near locations wherein woven fiberglass will not. When layered or blended with woven roving, very sturdy, rugged glass laminates may be constructed. Due to the amount of resin it absorbs, mat isn't always used in programs in which retaining it extraordinarily lightweight is important. Mat leaves a reasonably tough texture, that is a bonus in areas in which a non-slip floor is favored. The selection of either ¾ oz.. Or 1 ½ oz. Mat depends upon the strength required or the complexity of the surface to be glassed. The ¾ ounces. Will lay down over or into angles and curves with less paintings than the thicker 1 ½ oz.. Two layers of ¾ oz. Can be laid to identical the electricity and thickness of one layer 1 ½ oz. Mat will not delaminate or peel off as without problems as woven fiberglass. If it have been to be removed, mat could have a tendency to interrupt off in portions where woven fiberglass could peel off in sheets. Usually use brief nap paint roller to apply the resin to the mat. By no means apply the resin with a broom or squeegee. This would mop the fiberglass hairs around into piles and the finished product might have a totally lumpy texture, making sanding and completing a nightmare. Of course, it could be important to dab with a broom in tough angles or corners, but by no means stroke the floor back and forth. Continually apply dry mat to the floor you desire to cover and then practice the resin. In maximum instances the resin can surely be poured onto the surface from the integration can after which unfold round with the paint curler. One gallon of resin will wet out about 3 rectangular yards of one ½ ounces. Mat. While the usage of mat, a laminating roller ought to be used to massage out excess resin and the air that becomes entrapped in the laminate while it's miles nevertheless moist.

FEEDBACK
Name:
Phone:
Mail:
Company:
Content:
Address:
 
CONTACT US
Salse:Fred Wei
Skype: fred.wei08
Tel:+86-0832-8242208
Fax:+86-0832-8241969
Email:fred@chinaweibo.com.cn
Address:Group 3, Weijia, Yanling Town, Weiyuan County, Sichuan

TEL:+86-18602883091 +86-0832-8242208 FAX:+86-0832-8241969 Email:fred@chinaweibo.com.cn

Address:Webo Industrial Park, Yanling Town, Weiyuan Country, Sichuan, China

Sichuan Sincere&Long-term Complex Material Co., Ltd Copyright(C)2009-2016

fiberglass chopped strand mat

Online Service